Escient FireBall H-40 Remote control Uživatelský manuál stáhnout pdf (Strana 95)

INFRARED TAB (ALL DEVICES)

The Infrared Tab allows adjustments of the IR command stored on the selected button.

INFRARED PROPERTIES

1. Min. Repeats - Enter in this box the number of times that the

repeating part of the IR code is sent by the remote. Some infra

red receivers need a command to be repeated a certain number

of times to work properly, and some may not work properly if

the command is repeated at all. Change this setting only if you

are having trouble with a command.

2. Frequency - This box shows the carrier frequency of the

IR code. This is set automatically. You should not need to

change this value unless directed to do so by Technical

Support.

3. Sustain - Check this box to control whether or not the IR code

should repeat if the button is held down. Most infrared codes will

transmit continuously as long as the button is held down, but

some infrared receivers may not work properly if the command

is repeated at all. If the Sustain button is checked, the code will be transmitted for as long as the button is held

down, or the Minimum Repeat times, whichever is greater. If the Sustain button is not checked, the code will be

transmitted only the Minimum Repeat number of time regardless of how long the button is held down.

4. Command Information – Lists the details of the IR command stored in the selected button.

5. IR Waveform – This window shows a graphical representation of the Infrared waveform for the command

on the selected button. Use the scroll bar on the bottom to view the entire IR waveform. Select Copy to place a

picture of the IR waveform on the clipboard.

6. Select OK to Confirm the new settings.

Chapter 6. Working with Buttons

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 144 145

Žádné komentáře

Escient FireBall H-40 Remote control Uživatelský manuál Strana 95